Water-Soluble Powder Wood Stain for 0.5 Liters of Stain
Each bag contains between 5 and 17.5 grams of powder stain, depending on the color.
Staining enhances the characteristic texture of wood, changes its color, and provides protection simultaneously.
Preparation:
Clean and sand the wood thoroughly before staining. Remove sanding dust. Always conduct a test stain in an inconspicuous area.
Instructions for Use:
If water hardness is above 5, distilled water must be used to dissolve the dyes. Bring the contents to a boil in 0.5 liters of water, stirring constantly. Only use stainless steel or enamel containers for boiling. After cooling, the stain is ready for use. Apply the stain evenly along the wood grain using a brush or sponge. Wipe off any dripping stain immediately. After 1-2 minutes, remove excess stain in the direction of the grain. Dust-dry after approximately 8 hours. Lightly sand afterward and remove sanding dust.
The different stains can be mixed with each other.
Post-Treatment:
Stained surfaces can be treated with wax or oil, varnished, or matte finished.
Note:
The processing instructions are based on practical experience. Since material selection and processing conditions are beyond our control, these instructions are non-binding and do not guarantee specific properties. We recommend conducting your own tests.
Keep out of reach of children!
